Two-Factor Authentication for VMware Horizon View (VDI)

This configuration allows use of passcodes to authenticate to VMware View, as well as Duo's push and phone call authentication and SMS.

First Steps

Before moving on to the deployment steps, it's a good idea to familiarize yourself with Duo administration concepts and features like options for applications, available methods for enrolling Duo users, and Duo policy settings and how to apply them. See all Duo Administrator documentation.

You should already have a working primary authentication configuration for your VMware View Server users before you begin to deploy Duo.

To integrate Duo with your VMware View Server, you will need to install a local Duo proxy service on a machine within your network. This Duo proxy server will receive incoming RADIUS requests from your VMware View Server, contact your existing local LDAP/AD or RADIUS server to perform primary authentication, and then contact Duo's cloud service for secondary authentication.

If you are already running a Duo Authentication Proxy server in your environment, you can use that existing host for additional applications, appending the new configuration sections to the current config. You don't have to set up a new Authentication Proxy server for each application you create. However, there are some cases where it might make sense for you to deploy a new proxy server for a new application, like if you want to co-locate the Duo proxy with the application it will protect in the same data center.

We recommend the following 64-bit operating systems for the system hosting the Duo Authentication Proxy:

• Windows Server 2016 or later
• CentOS Stream 9 or later
• Fedora 39 or later
• Red Hat Enterprise Linux 7 or later
• Rocky Linux 9 or later
• Ubuntu 20.04 LTS or later
• Debian 11 or later

The Duo End of Sale, Last Date of Support, and End of Life Policy states that Duo does not offer support for integrations running on operating system versions beyond the vendor’s stated Last Date of Support date.

See detailed Authentication Proxy operating system performance recommendations in the Duo Authentication Proxy Reference.

We do not recommend installing the Duo Authentication Proxy on the same Windows server that acts as your Active Directory domain controller or one with the Network Policy Server (NPS) role. If you must co-locate the Duo Authentication Proxy with these services, be prepared to resolve potential LDAP or RADIUS port conflicts between the Duo service and your pre-existing services.

Then you'll need to:

1. Sign up for a Duo account.
2. Log in to the Duo Admin Panel and navigate to Applications → Protect an Application.
3. Locate the entry for VMware View with a protection type of "2FA" in the applications list. Click Protect to get your integration key, secret key, and API hostname. You'll need this information to complete your setup. See Protecting Applications for more information about protecting applications in Duo and additional application options.

Install the Duo Authentication Proxy

If you will reuse an existing Duo Authentication Proxy server for this new application, you can skip the install steps and go to Configure the Proxy.

The Duo Authentication Proxy can be installed on a physical or virtual host. We recommend a system with at least 1 CPU, 200 MB disk space, and 4 GB RAM (although 1 GB RAM is usually sufficient). See additional Authentication Proxy performance recommendations in the Duo Authentication Proxy Reference.

We do not recommend installing the Duo Authentication Proxy on the same Windows server that acts as your Active Directory domain controller or one with the Network Policy Server (NPS) role. If you must co-locate the Duo Authentication Proxy with these services, be prepared to resolve potential LDAP or RADIUS port conflicts between the Duo service and your pre-existing services.

duoauthproxy-version.exe /S

duoauthproxy-version.exe /S /exclude-auth-proxy-manager

sudo ./duoauthproxy-build/install --install-dir /opt/duoauthproxy --service-user duo_authproxy_svc --log-group duo_authproxy_grp --create-init-script yes

Configure the Proxy

After the installation completes, you will need to configure the proxy.

The Duo Authentication Proxy configuration file is named authproxy.cfg, and is located in the conf subdirectory of the proxy installation. With default installation paths, the proxy configuration file will be located at:

Note that as of v4.0.0, the default file access on Windows for the conf directory is restricted to the built-in Administrators group during installation.

The configuration file is formatted as a simple INI file. Section headings appear as:

[section]

Individual properties beneath a section appear as:

name=value

The Authentication Proxy may include an existing authproxy.cfg with some example content. For the purposes of these instructions, however, you should delete the existing content and start with a blank text file.

Duo Authentication Proxy Manager

The Duo Authentication Proxy Manager is a Windows utility for managing the Authentication Proxy installation on the Windows server where you install the Authentication Proxy. The Proxy Manager comes with Duo Authentication Proxy for Windows version 5.6.0 and later.

The Proxy Manager cannot manage remote Duo Authentication Proxy servers, nor can you install the Proxy Manager as a stand-alone application. There is no Proxy Manager available for Linux. The Proxy Manager only functions as part of a local Duo Authentication Proxy installation on Windows servers.

Learn more about using the Proxy Manager in the Duo Authentication Proxy Reference before you continue.

To launch the Proxy Manager utility:

• Open the Start Menu and go to Duo Security.
• Click the Duo Authentication Proxy Manager icon to launch the application. You must have administrative privileges on the Windows server and accept the prompt for elevation.
• The Proxy Manager launches and automatically opens the %ProgramFiles%\Duo Security Authentication Proxy\conf\authproxy.cfg file for editing.

Use the Proxy Manager editor on the left to make the authproxy.cfg changes in these instructions. As you type into the editor, the Proxy Manager will automatically suggest configuration options. Accepting these suggestions helps make sure you use the correct option syntax.

As you follow the instructions on this page to edit the Authentication Proxy configuration, you can click Validate to verify your changes (output shown on the right).

When you complete the Authentication Proxy configuration steps in this document, you can use the Save button to write your updates to authproxy.cfg, and then use the authproxy.cfg button to start the Authentication Proxy service before continuing on to the next configuration steps.

If you do not use the Proxy Manager to edit your configuration then we recommend using WordPad or another text editor instead of Notepad when editing the config file on Windows.

Configure the Proxy for Your Primary Authenticator

In this step, you'll set up the Proxy's primary authenticator — the system which will validate users' existing passwords. Determine which type of primary authentication you'll be using, and create either an Active Directory/LDAP [ad_client] client section, or a RADIUS [radius_client] section as follows.

Active Directory

Add an [ad_client] section if you'd like to use an Active Directory domain controller (DC) or LDAP-based directory server to perform primary authentication. This section accepts the following options:

Required

search_dn=DC=example,DC=com

Optional

security_group_dn=CN=DuoVPNUsers,OU=Groups,DC=example,DC=com

For example:

[ad_client]
host=1.2.3.4
host_2=1.2.3.5
service_account_username=duoservice
service_account_password=password1
search_dn=DC=example,DC=com
security_group_dn=CN=DuoVPNUsers,OU=Groups,DC=example,DC=com

For advanced Active Directory configuration, see the full Authentication Proxy documentation.

RADIUS

To use RADIUS as your primary authenticator, add a [radius_client] section to the top of your config file. Then add the following properties to the section:

Required

Optional

For example:

[radius_client]
host=1.2.3.4
host_2=1.2.3.5
secret=radiusclientsecret

In addition, make sure that the RADIUS server is configured to accept authentication requests from the Authentication Proxy.

For advanced RADIUS configuration, see the full Authentication Proxy documentation.

Configure the Proxy for Your VMware View Server

Next, we'll set up the Authentication Proxy to work with your VMware View Server. Create a [radius_server_challenge] section and add the properties listed below. If you've already set up the Duo Authentication Proxy for a different RADIUS Challenge application, append a number to the section header to make it unique, like [radius_server_challenge2].

Required

Optional

A completed config file, using Active Directory as the primary authenticator, should look something like:

[ad_client]
host=1.2.3.4
service_account_username=duoservice
service_account_password=password1
search_dn=cn=Users,dc=example,dc=com
 
[radius_server_challenge]
ikey=DIXXXXXXXXXXXXXXXXXX
skey=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
api_host=api-XXXXXXXX.duosecurity.com
failmode=safe
client=ad_client
radius_ip_1=5.6.7.8
radius_secret_1=radiussecret1
port=1812

Make sure to save your configuration file in your text editor — or validate and save in the Proxy Manager for Windows — when you're finished making changes.

When creating the RADIUS secret to share between the Authentication Proxy and VMWare View, consider avoiding the special characters &, <, >, and " as the HTML5 Horizon View admin client may not encode these correctly.

Start the Proxy

net start DuoAuthProxy

authproxyctl start

net stop DuoAuthProxy & net start DuoAuthProxy

authproxyctl restart

# /opt/duoauthproxy/bin/authproxyctl start

# /opt/duoauthproxy/bin/authproxyctl status

# /opt/duoauthproxy/bin/authproxyctl restart

If you modify your authproxy.cfg configuration after initial setup, you'll need to stop and restart the Duo Authentication Proxy service or process for your change to take effect.

You can view information about your Authentication Proxy in the Authentication Proxy Dashboard.

Configure VMware View

Configure Your VMware View Connection Server

1. Log in to the VMware View administrative interface.
2. Navigate to View Configuration → Servers → Connection Servers in the administrative interface.
3. Select the connection server that you want to protect and click Edit.
4. Click on the Authentication tab.
5. Under "Advanced Authentication, select RADIUS in the "2-factor authentication" drop-down list.
6. Enable both Enforce 2-factor and Windows user name matching and Use the same user name and password for RADIUS and Windows authentication.
7. Select Create New Authenticator in the Authenticator drop-down list:
8. Add a new RADIUS authenticator with the following information:

   Label	A name for this authenticator. This name is shows in client connection during authentication.
   Description	An optional description of this authenticator.
   Hostname/Address	The IP address or host name of your Duo Authentication Proxy server.
   Authentication port	The RADIUS port specified in your authentication proxy configuration (default is 1812).
   Accounting port	The accounting port must be set to 0 to avoid delays or failures during authentication. You may need to access the Flash-based Horizon View admin client to set this to 0 if you cannot set it with the HTML5 Horizon View admin client.
   Authentication type	Select PAP.
   Shared secret	The RADIUS secret shared with your Duo Authentication Proxy. Consider avoiding the special characters &, <, >, and " as the HTML5 Horizon View admin client may not encode these correctly.
   Server Timeout	60

   
9. Click Next VMware View allows you to configure an optional secondary Authentication Server. Click Finish to complete creating the Duo RADIUS authenticator.
10. Ensure both user name options are enabled and that the newly-created Duo RADIUS authenticator is selected, and then click OK.

Test Your Setup

1. Start Your VMware View Client and enter your primary credentials (make sure you've already enrolled in Duo).

   

2. After you enter your username and password, a second window displays the Duo challenge prompt, listing your available factors (or an enrollment URL).

   

Duo two-factor login for jdoe

  Enter a passcode or select one of the following options:
  
  1. Duo Push to XXX-XXX-1234
  2. Phone call to XXX-XXX-1234
  3. SMS passcodes to XXX-XXX-1234
  
  Passcode or option (1-3)
  

In the text response area, type in the number that matches the option you want to use to log in. For example, to log in with Duo Push after receiving the above challenge prompt, enter 1, and then approve the Duo Push request you receive.

Instead of typing in the number that corresponds to the listed options, you may also enter a Duo factor option:

If you wanted to use Duo Push (rather than a passcode) to authenticate, you would enter:

push

You can also specify a number after the factor name if you have more than one device enrolled (as the automatic push or phone call goes to the first capable device attached to a user). So you can enter phone2 or push2 if you have two phones enrolled and you want the authentication request to go to the second phone.

The format of the Duo RADIUS text challenge prompt may change if you have multiple authentication devices enrolled in Duo, due to the character length limit of a RADIUS packet. If we detect that the user logging in has too many devices to list by number with full details the Duo proxy will automatically switch to a compact format, like this.

Choose a secondary factor from (`push1`, `phone1`, `sms1`) or enter passcode:

Respond to this prompt in the same way, by typing in either the name of a Duo factor listed or a number that matches a factor's position in the list.

Troubleshooting

Need some help? Review troubleshooting tips for the Authentication Proxy and try the connectivity tool included with Duo Authentication Proxy 2.9.0 and later to discover and troubleshoot general connectivity issues.

Also take a look at the View Frequently Asked Questions (FAQ) page or try searching our VMWare Horizon View Knowledge Base articles or Community discussions. For further assistance, contact Support.

Network Diagram

1. Primary authentication initiated to VMWare View
2. VMware View sends RADIUS authentication request to Duo Security’s authentication proxy
3. Primary credential verification using Active Directory
4. Duo authentication proxy connection established to Duo Security over TCP port 443
5. Secondary authentication via Duo Security’s service
6. Duo Authentication Proxy receives authentication response and sends to VMWare View
7. VMWare View performs primary authentication to Active Directory
8. VMware View access granted